Product: DSL-G604T WIRELESS ADSL Router with 4-port switch for DLinkEU Release version: V2.00B01T01.EU.20050930 Release date: 2005/09/30 : 1. Fix DMZ issue. 2. Fix IGMP package flood. 3. More than 15 rules in Advanced/Filter and Advanced/Bridge Filter. 4. Adjust parameters to avoid the lack of NAT sessions issue while using P2P. * Fix multiple bridge(PVC) issue for DSL-G6xxT series models.(2005/08/15) * Fix it can not add staic route rule into routing table after system save&reboot.(2005/06/30) <2005/06/09> 1.The default setting of VPI/VCI of PVC1~PVC7 is 0/0 2.Re-patch the issue of wireless power level setting on web. 3.When using PPPoE connection with manual ,there are some abnormal message in WAN setting. 4.PPP MTU:There is a difference between the default MTU configuration (1400) in the WAN section what is shown in the router logs: Sep 8 12:00:43> Default Asymmetric MTU for ppp0 1500. 5.Tools->Firmware: It doesn't check the invalid file when user uses the wrong file . 6.WAN->PPP mode->MTU : The message error happened when MTU field check it.it will show "MTU can't be less than 40" . But we input 80 value still occur it. 7.Advanced->DMZ: The DSL-604T's default lan ip address is 192.168.1.1 but the ip address of DMZ can be configured to ex 200.1.1.2(not same network as LAN IP). <2005/04/30> * FIX: Wireless performace page function function issue <20050429> *FIX A01: Help--->"Routeing" *FIX A02: The content of Firewall is incorrect. *FIX A03: Suggest: The characters(pass) and color are made into equally *FIX A04: The ping test to internet Domain name is failed *FIX A05: When PPPoE connection was to break off,the Device info status still show the WAN IP *FIX A09: Then PPP will not take effect if PPP username & password contains character "&". *FIX A11: Can't check the invalid IP address. *FIX A12: Recommend to modify "time.nist.gov" to "192.43.244.18"ip address. *FIX A16: "After the PPPoA with Unnumbered IP connection was established ,the WAN IP address can't display on the Device info. PS:please refer to B004" *FIX A17: Recommend to modify "connection0~connection7" to "PVC0~PVC7" *FIX A24: "After web port is configured to other ports then clicked the ""Apply"" button. And we save & reboot it ,then It can't take effect at once to remote Web/telnet via other webport . " *FIX A25: Strong recommend to increase some information about the "WebPort". *FIX A26: "The description of Daylight Saving is incorrect, please modify it. please refert to figure B007" *FIX A30: "Select PVC4 to setting ""IPoA"" connection type!! But wan info shows mistake in the status page! *FIX A32: "Error input the MTU=aaaa, and click the ""Apply"" button, then it became MTU = NaN , Should it show some error message ? Ex: "" there should use the number from 0 to 9""." *FIX A33: suggest :The webpage showed that information "Must to save setting & Reboot the system " to take effect. *FIX A34: After Setting Dynamic IP Address , when Clone MAC Address entry is empty and apply the "Next" button,the warning signal is abnormal. *FIX A35: "The idle time column doesn't check ""not numeral"".(ex.3f,100#) #The column will show an error message -""NaN"" "" when we input the character. " *FIX A36: The VPI and VCI column doesn't check the invalid value(ex.Character 3#) *FIX A38: "The DHCP Clients List doesn't have any about Expired time of the DHCP lease for each client computer,but the DHCP Help of contents is exist. PS:please refter to B013" *FIX A40: The RIP function web page doesn't show the RIP v2 feature. *FIX A41: Verify the Add/Remove button works properly. *FIX A42: Type of The static Address table and Dynamic address table is abnormal.It should be "Dynamic"! *FIX A44: Only max 15 characters can be inputted. EX: we can't ping the web site : www.microsoft.com . *FIX A50: The function of WPA security is failed. *MODIFY : add RIP2 option and help description on web page *MODIFY : DDNS malfunction *MODFIY : add default DNS ip in config.xml <20050415> Fixed Bugs: 1. In 'Wireless' page, when user set security to "WPA"->"802.1x", the path "ap:settings/privacy_type" should also equal to 1, not equal to 4. Even though some comment in source codes shows "WPA-1, WEP-2, 802.1x-4", we don't use "ap:settings/privacy_type=4" in 802.1x case. About the 3 subsets in WPA setting, we use "ap:settings/psktype" to recognize it's 802.1x, PSK Hex, or PSK String. So, the 3 cases all need to set "ap:settings/privacy_type" to 1. 2. In 'Wireless' page, when set security to WEP, the 256-bits WEP key length should be 58, not 52. The mistake is occured on 'message sentence' and also on input length 'javascript check'. 3. In 'Wireless Performance' page, the setting result is a little strange. When first time set the 'Antenna transmit power' to 'full', the value should be 1, but it's 11 in cfgmgr. When set the 'Antenna transmit power' to 'full' next time, the value should be 1, but it's 2 in cfgmgr. So, web people need to test this page more carefully, to find out what's going wrong. New features: 1. Please add "User Isolation" after Channel setting of Home->Wireless as wireless_feature.doc. You can refer to TI original web page code in attached wireless.zip. 2. Please add "OAM Type: F4/F5 selectable" to Tools->Test. Our page only supports "F5 segment ping" and "F5 end ping" now. (1)Default settings Modulation Type: Multi-mode connection1: PPPoE LLC VPI/VCI : 8/35 User name : admin Password : admin IP Address: 192.168.1.1 Subnet Mask ĄG255.255.255.0 (2)ATM Driver 4.03.03.00 DSL HAL 3.02.00.03 DSL Datapumps 3.02.06.00 Annex A mtd setting: Please execute the script file (mtd-4m.txt) before loading firmwares via pc-app. Please set mtd as mtd-4m.txt, please also use boot loader(adam2) for 4M flash. (download from PC_APP) DLinkEU_DSL-G604T_singleimage_kernel_fs_V2.00B01T01.EU.20050930 (download from web for customer) DLinkEU_DSL-G604T_singleimage_kernel_fs_V2.00B01T01.EU.20050930 Config file: config.DLinkEU_DSL-G604T.img - factory reset